Important notes
Release Stage: Testing *
* This release is only for the UDM PRO.
* You can find the UniFi OS introduction here.
* Upgrade has to be done via SSH.
* Those with user-defined firewall rules on both IPv4 and IPv6 should see Known Issues before upgrading.
Bundled Controller
When reporting, please be as detailed as possible and include reproduce steps/logs.
Checksum
MD5: 7fb8f60c494980628eecab49d722946c
SHA256: 97dd6e83f68efd37b30bbbbe30a33dc8ba984821205d569b60291b03a7b5d633
Upgrade command
SSH into your UDM Pro and execute the following in it's shell:
ubnt-upgrade https://fw-download.ubnt.com/data/udm/aaa0-udmpro-1.6.5-rc.3-29600965d1f5432e9183b905865bd685.bin
Download links
UDM PRO 1.6.5 RC3
Release Stage: Testing *
* This release is only for the UDM PRO.
* You can find the UniFi OS introduction here.
* Upgrade has to be done via SSH.
* Those with user-defined firewall rules on both IPv4 and IPv6 should see Known Issues before upgrading.
Bundled Controller
- UniFi Network controller 5.12.63.
FeaturesAs of UDM firmware 1.2.0 (and later) Smart Queues are default enabled for existing and new installs when the WAN speed is <=300Mbps. If you're experiencing unexpected slowness then please double check the configured speeds or disable Smart Queues under Settings>Networks>WAN>Common Settings>Smart Queues in Classic Mode or Settings>Internet>WAN Networks>WAN>Common Settings>Enable Smart Queues in New Settings.
- Add SFP+ speed configuration.
- Add ability to download a support file.
- Improved switch stability.
- Improved LCM timing for recovery image.
- Improved filesystem reliability.
- Improved response time for LAN subnet change when it conflicts with WAN.
- Improved storage status UI.
- Allow 2FA field to be auto-filled.
- Fix upload of large images on a remote connection.
- Fix support for fallback DNS (1.1.1.1).
- Fix issue with CPU load gauge.
- Fix NAT hairpin interface matching.
- Fix timezone sync between container and host.
- Fix disconnects from the Network Controller during cloud outage.
- Minor UI fixes and updates.
- With user-defined firewall rules on both IPv4 and IPv6, a commit error will result from duplicate rule IDs. Those with only IPv4 or only IPv6 user-added rules, or who have not added any custom firewall rules, are not impacted.
- Login page UI does not display any errors when using invalid credentials.
- Auto-upgrade frequency settings lacks "Disabled" option.
- You might experience some UI issues on Chrome 80 ( Chrome Canary v82.x resolves this ).
When reporting, please be as detailed as possible and include reproduce steps/logs.
Checksum
MD5: 7fb8f60c494980628eecab49d722946c
SHA256: 97dd6e83f68efd37b30bbbbe30a33dc8ba984821205d569b60291b03a7b5d633
Upgrade command
SSH into your UDM Pro and execute the following in it's shell:
ubnt-upgrade https://fw-download.ubnt.com/data/udm/aaa0-udmpro-1.6.5-rc.3-29600965d1f5432e9183b905865bd685.bin
Download links
UDM PRO 1.6.5 RC3