UAP/USW Firmware 4.0.54.10625

UniFi

RSS Bot
UniFier
1 feb 2018
344
33
28
Important notes
Release Stage: Release Candidate
Bugfixes
  • [nanoHD/IW-HD] Fix broadcast/multicast Tx stuck issue which may cause high memory usage.
  • [IW-HD] Fix DVLAN DHCP issue when Port VLAN is enabled.
  • [UAP] Fix guest portal fail to redirect on untagged subnet when device has a static IP.
  • [UAP] Improve CPU usage.
  • [USW] Possible fix for a bug with DHCP snooping which may cause issues with DHCP.
  • [USW-6PoE] Enable ability to set 2.5Gbps link speed for SFP+ ports.
  • [USW-6PoE] Fix false overload state causing PoE issues (reported HERE).
Known issues
  • UAP, UAP-LR, UAP-IW, UAP-OD and UAP-OD5 cannot be downgraded from firmware 4.0.17+ to an earlier release.
Instructions
  • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).
  • You may start to see EVT_AP_RestartProc events in the controller log. If you see these, please report if there is anything specifically in your setup that triggers the events. The processes restarting is not new, but the reporting of the restarting is, and we are using these reports to clean up these issues.
  • US-XG-6POE upgrading from 4.0.2 or earlier will take a long time to upgrade. Don't be surprised if your switch is unavailable for 5-10+ minutes as 4.0.3+ also updates the PoE firmware to improve PD compatibility.
  • UIS-8-450W upgrading from 4.0.33 and earlier will have their PoE firmware upgraded automatically to improve PD compatibility. That process will take a few minutes. PoE will be unavailable during the upgrade process.
  • 1st gen UAPs may require extra steps when upgrading from firmware 4.0.3. You can try disabling all WLAN groups, and then running the upgrade. Devices that are seemingly "stuck" on 4.0.3 may require TFTP recovery to upgrade from that firmware.
  • All supported 1st gen APs need to be on a minimum of 4.0.10 prior to upgrading to this firmware. Controller 5.10.3+ will force an upgrade to 4.0.10 prior to upgrading to this release (only if your device isn't running 4.0.10 already).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:
  • Controller version.
  • Firmware version (previous and current).
  • Device model(s).
Download links
UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW/IW-Pro | md5sum | sha256sum
UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum
UAP-nanoHD/IW-HD | md5sum | sha256sum
UAP, UAP-LR, UAP-OD, UAP-OD5 | md5sum | sha256sum
UAP-v2, UAP-LR-v2 | md5sum | sha256sum
UAP-IW | md5sum | sha256sum
UAP-Pro | md5sum | sha256sum
UAP-OD+ | md5sum | sha256sum
US/US-POE | md5sum | sha256sum
US-L2-POE | md5sum | sha256sum
US-16-XG | md5sum | sha256sum
USW-XG-6POE | md5sum | sha256sum
UIS-8-450W/USC-8 | md5sum | sha256sum
USW-Flex | md5sum | sha256sum
USW-Multi | md5sum | sha256sum
 
  • Leuk
Waarderingen: PcRene
Is inmiddels al verschenen op de controller hier als update. Iemand deze geüpgrade al uitgevoerd?
 
Laatst bewerkt:
In de woonkamer. accespoint hangt 6 meter verder op aan de andere kant van een muur.
Internet is een 500/500 verbinding
 
  • Leuk
Waarderingen: RTKE
Cisco SEP IP telefoons werken niet meer na de laatste firmware update, ze zijn gekoppeld op US-48 switch met eigen voeding. Iemand ideeën?
 
Het is een US-48 geen US-48-450W, dus de telefoons krijgen voeding via eigen adapter. Ze kunnen inderdaad niet meer bellen. Andere toestellen Tiptel, werken wel gewoon op dezelfde voip cloud pbx.
 
Sorry, er wordt zoveel over de poe switches gepraat dat het bijna vanzelf sprekend is.
Gebruik je vlans? Vlans in het toestel geprogrammeerd?

Rene
 
Dan een port mirror maken en kijken wat er wel of niet aan communicatie is.
Kun je wel zien in de telefoon of er een geldig IP-adres in staat?

Rene
 
Je kan mijn melding negeren, bleek een oude config in de Cisco toestellen te zijn. Herstart van de switches zal dit wellicht wel getriggerd hebben, maar dus geen probleem met deze firmware.
 
  • Leuk
Waarderingen: PcRene
Activiteit
Er wordt op dit moment (nog) geen nieuwe reactie gepost.
  Topic Status: Hallo . Er is al meer dan 14 dagen geen nieuwe reactie meer geplaatst.
  De inhoud is mogelijk niet langer relevant.
  Misschien is het beter om in plaats daarvan een nieuw onderwerp te starten..