Overview
* This release is currently a release-candidate.Improvements
- Add an icon for VPN clients in the clients page.
- Add a new Traffic Inspector page.
- Add Traffic rules. (Requires UDM 1.11 FW or newer)
- Add the ability to lock a client to a specific AP. (requires UAP firmware 5.76.0)
- Add Internet Latency on Dashboard for setups with USG.
- Add Uplink/Port column in the devices page.
- Add secondary sorting by connection type when sorting by the vendor on the clients page.
- Add support for ARP Cache Timeout for UDM and UXG.
- Add "Create WiFi" toast when adopting AP without existing WiFi.
- Add DFS channels to default WIFi AI exclude channels list.
- Add informative tooltips in WiFi Settings.
- Improve client name display.
- Improve reliability of the upgrade process.
- Improve dashboard responsive styling.
- Improve table column header styles.
- Improve FW status in Device table when upgrading.
- Improve clients page performance with lots of Offline clients.
- Improve user experience for tables inside panels.
- Limit Mongo wiredTiger cache size to 256M. (see more details here)
- Clean up Notifications based on retention settings.
- Change default auto-backup settings.
- Default to active WAN in the dashboard.
- Reorder Traffic & Security setting order.
- Re-center topology when the filter is changed.
- Hide offline devices by default in topology.
- Add zoom-in/zoom-out buttons in Topology.
- Display VPN client network name.
- VPN Settings optimization.
- Remove System Utilization from the dashboard.
- Auto-update device firmware when adopting a new device.
- Use the most recent Traffic Overview stats on Dashboard.
Bugfixes
- Stop retrying device auto-adoption after 3 failed attempts.
- Fix device scaling issues in Topology on Safari browser.
- Fix unable to remove an administrator from sites.
- Fix U-LTE Pro Adoption modal Network Selection.
- Fix user interface crash in Hotspot form.
- Fix element adoption when the site has RADIUS assigned VLAN SSID.
- Fix UID VPN users not being shown on the clients page.
- Fix issue where U-LTE device failover would not work correctly.
- Fix issue when dashboard can’t be opened when ISP section is missing latency information.
- Fix issue when cannot disable unused Radius Server.
- Fix issue where a Honeypot could refer to a deleted Network.
- Fix issue where client name is constantly changing.
- Fix visual text overflows for long client names.
- Fix missing WAN IP on the dashboard when using PPPoE or WAN VLANs.
- Fix speedtest failure when the WAN interface has VLAN/is PPPoE.
- Fix VPN Checkmark alignment in settings.
- Fix Port Profile Override not being overwritten by port profile when selected.
- Fix issue where the user could disable meshing on access points that can only wireless uplink.
- Fix issue where invited administrators would have View Only Role.
- Fix association failure statistics not displayed on Legacy Dashboard.
- Fix missing device icon in notifications.
- Fix network VLAN validation issue.
- Fix page crash in the dashboard for setups without gateway/uplink.
- Fix U-LTE Pro Adoption modal Network Selection.
- Fix issue where all devices were not displayed in the Device list.
- Fix Backup is not respecting retention settings for Notifications and DPI statistics.
- Fix Hotspot form Security settings when using WPA3.
- Fix issues where the user can’t change the color theme.
- Fix MAC address clone field formatting.
- Fix notification email using the wrong timezone.
- Fix ISP utilization granularity for the last day.
- Fix issue where UniFi Network backups fill up the data partition on the UDM-Pro.
- Fix number input update when using the up or down arrow.
- Fix sorting by a client in the statistics page.
- Fix visual text overflows for long client names.
- Fix users with limited permissions cannot access the application.
- Fix application failing to upgrade from 5.10.x versions.
- Fix device page not loading in rare cases.
- Fix traffic usage stats inconsistencies on dashboard and statistics pages.
- Fix Dashboard is missing WiFi Client count for 1 month view.
- Fix missing Simple VPN clients in clients list.
- Fix missing WAN IP when using WAN VLAN.
- Fix application cannot start because of Radius failure.
- Fix missing Unsplash background in Hotspot Portal.
- Fix USP-Plug/Strip adoption issues on setups with WPA3 only.
- Fix Broken legacy threat management page.
- Fix Disappearing graph when opening device panel.
- Fix unable to edit client name in topology page.
- Fix issue where TOR events are not present in the IPS map.
- Fix issue where ports would not show auto-negotiation by default.
- Fix issue where an unrecognized console was showing when the dashboard was being loaded.
- Fix unable to apply port profiles on rare cases.
- Fix unable to upload custom background for Guest Portal.
- Fix unable to access WAN port settings on UDR console.
- Fix misaligned client table columns.
- Fix page crash when accessing downlink.
- Allow to display pending devices if the admin has adopt permissions (for standalone application only).
- Allow to restart the device if the view-only admin has restart permissions (for standalone application only).
- Remove the "meters" label for route distance.
- Redirect to the last used site that the user has access to.
- Use the correct images for UAP-AC-M-Pro.
- Use default LAN IP for UXG in the dashboard and property panel.
- Uplink/AP port field & display options AP dropdown.
- Show correct state when a device fails to adopt.
- Peak Upload / Download Usage was reversed in Internet Settings.
- Show correct PoE type icon for ports.
- Update logic for "View improvements" in the Notifications page.
- Display client name in AP history.
- Do not provision disabled networks on UDM.
- Set exposed to Site VPN for UID VPN, so users can traverse policy-based IPsec S2S VPNs.
- Prioritize LTE DNS entries over default 1.1.1.1.
- Populate site-wide LCM brightness upon adoption.
- Remove AP Group from WiFi configuration when AP Group is deleted.
Additional information
Please report any issues you encounter with this release using the Report Bug form.(Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.
- Existing UniFi Network Applications must be on one of the following versions in order to upgrade directly to this version:
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for direct upgrade, going back to 3.1.0.
- UniFi Network Application updates may cause your adopted devices to reprovision.
- An updated/current version of Java 8 must be installed on the system hosting the UniFi Network Application. Java 9 and later are not yet supported.
- As of UniFi Network Application version 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements here.
- Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.
- If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.
Microsoft Windows specific
- Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.
macOS Specific
- We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.
- Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.
Debian/Ubuntu specific
- For Debian/Ubuntu users installing via our repo, please update your APT source (see HERE).
- We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.
Checksums
79c958485a5e7e0ed5aaf1de5949fee8 *UniFi-installer.exe
1345b2f695a618fc004a4656e1f35c29 *UniFi.pkg
27e1e4b365ecb38e8d99c9238f7a48a0 *unifi_sysvinit_all.deb
601df32736f41e40a80a3e472450a3e1 *unifi_sh_api
------------------------------------------------------------------------------------------------------------------------
SHA256(UniFi-installer.exe)= a474ab80439efae93f27cc64a39398ef34e6db3e4871a7312feb661cd23caaa1
SHA256(UniFi.pkg)= f8eade3777de7fc5e93880d6f5831d281796764d3958070b1acc344b34e7e9ec
SHA256(unifi_sysvinit_all.deb)= d4dc9cd1abfc1bb15506f5ae3b810027822844554c981baa5ff24187f6a63ec6
SHA256(unifi_sh_api)= 1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu and UniFi Cloud Key
unifi_sh_api (shell library)
Laatst bewerkt: