Official UAP Firmware 6.2.16

[m4v3r1ck]

Overview​

* This release is only for the Gen6 AP's and is currently a Release Candidate.

This version provides a new High-Performance Devices (band steering) logic. This new logic is less strict than the implementation in previous versions and allows dual-band devices join the 2.4GHz network under certain conditions. Users should expect better interoperability, more reliable access for all device types and extended range in case of insufficient 5GHz signal level.

Improvements​

• [UAP] Revamp Band Steering (previously called High Performance Devices).
• [UAP] Improve overall stability by fixing a number of kernel crashes.
• [UAP] Restructure the impact of DNS timeouts on the Wireless Experience Score.
• [UAP] Update packages (openssl, dropbear, zlib).
• [UAP] Update regulatory data for Israel and Bahrain to align with country requirements.
• [UAP] Allow ARP traffic on WLAN even if Multicast and Broadcast block is enabled to avoid hindering device discovery."

Bugfixes​

• [UAP-Gen6] Fix WPA3 connectivity issues.
• [UAP-Gen6] Fix radios not broadcasting in certain countries.
• [UAP-Gen6] Fix untagged RADIUS clients experiencing packet loss.
• [UAP-Gen6] Fix incorrect signal strength reporting for 5GHz clients.
• [UAP] Fix wireless uplink issues when uplink monitor is set to check connectivity to 127.0.0.1 (localhost).
• [UAP] Partly fix hostnames in guest preauthorized access list not working. Full fix will be rolled in via a Network Application update. This partial fix covers cases where guest VLANs are in use.
• [UAP] Fix occasional adoption failures.
• [UAP] Fix WLANs not broadcasting a few minutes after boot in certain topologies. This was introduced in 6.0.18.

Additional information​

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

• Network Application version.
• Firmware version (previous and current).
• Device model(s).

U6-Pro/Mesh/IW | md5sum | sha256sum

 

[m4v3r1ck]

Al geruime tijd - meerdere firmwareversies terug - deze melding van mijn enige U6-PRO en alleen voor mijn iPhone Xs. Ook met deze nieuwe versie deze melding, terwijl de iPhone gewoon perfect werkt op dit AP. Ook de roaming is op orde naar de AP-AC-PRO.

kernel: [61856.525005] wlan: [28088:I:ANY] [UNSPECIFIED] vap-1(ath1):iwpriv[28088] ieee80211_ioctl_kickmac sta 6c:xx:xx:xx:xx:xx

 

[m4v3r1ck]

Zou iemand mij een hint kunnen geven hoe ik deze melding kan oplossing. Vloedgolven aan meldingen:

kernel: [835091.029881] wlan: [28687:I:ANY] [UNSPECIFIED] vap-2(ath2):iwpriv[28687] ieee80211_ioctl_kickmac sta 6c:xx:xx:xx:xx:xx

Bedankt alvast!

 

[Hofstede]

Heb je iets van Minimum RSSI o.i.d. aan staan op die AP? Dit wil alleen maar zeggen dat het betreffende device van de AP gegooid wordt.

 

[m4v3r1ck]

Heb je iets van Minimum RSSI o.i.d. aan staan op die AP? Dit wil alleen maar zeggen dat het betreffende device van de AP gegooid wordt.

Nee, alles even nagelopen.



Inderdaad wordt mijn iPhone Xs steeds heel even kort gekickt van de AP U6-Pro. Ik kan de grafieken in de oude GUI dan ook niet duiden en er iets uitfilteren.

 

[Hofstede]

Bandsteering? Of andere speciale opties.

 

[dbw]

Nee, alles even nagelopen.

Bekijk bijlage 5531

Inderdaad wordt mijn iPhone Xs steeds heel even kort gekickt van de AP U6-Pro. Ik kan de grafieken in de oude GUI dan ook niet duiden en er iets uitfilteren.

2.4 moet je niet op HT40 zetten. Daar win je niks mee. HT20 is beste voor 2.4

 

[m4v3r1ck]

Bandsteering? Of andere speciale opties.

Nee geen bandsteering, ook geen speciale opties.

 

[m4v3r1ck]

2.4 moet je niet op HT40 zetten. Daar win je niks mee. HT20 is beste voor 2.4

Ga ik direct even veranderen.

edit: aangepast, even kijken wat dit gaat doen.

 

[m4v3r1ck]

edit: inmiddels firmware inmiddels op UAP 6.2.19

Na de tips van jullie, die niet het gewenste resultaat opleverde heb ik de U6-PRO een reset gegeven (button). De meldingen vliegen me nu echt om de oren. Zou het AP wellicht defect kunnen zijn?